dLab1
Optical measuring tool for O-rings and technical components, available in 4 sizes.
Inspections
- Dimensionals
The inspections that can be carried out are:
Rings
- Minimum and maximum internal diameter
- Minimum and maximum external diameter
- Maximum difference between the maximum and minimum internal diameter
- Minimum and maximum cord value
- Average internal diameter
- Average external diameter
- Average cord
Irregular Figures/Borders
- Four programmable rulers for measuring linear distances on the part template, established through automatic calibration.
- Automatic point measurement system (dedicated software) that makes it possible to obtain orthogonal measurements even for non-parallel contours.
- Radii of partial curvature, inter-axial distance, internal diameters.
- Item memorized in order to perform subsequent consecutive measurements without needing to orient the part.
- Comparison between tolerances (five positive and five negative or zero with respect to the nominal value).
- Values memorized in a dedicated table with calculation of CP and CPK.
Description
dLab 1 is a manual loading/unloading machine that is suitable for contact-less measurement.
Parts are measured using a camera with a resolution of 5 Mpx, equipped with telecentric optics, which makes it possible to acquire distortion-free images.
The data related to this image is transferred to the computer, which makes it available to the operator in numerical form thanks to a graphic interface. This data is then stored in a database and can be accessed at any time. Measurements can be made on both circular and/or irregular shapes like borders.
dLab 1 offers the possibility of taking multiple measurements by positioning several parts within the framed field at the same time; the values obtained will take into account the preset average tolerances.
- Statistics and Reports
- Batch Traceability
- Remote Management
- Interfacing with Management Software (M.E.S.)
Technical characteristics
Technical Data Sheet | dLab1 S | dLab1 M | dLab1 L | dLab1XL |
Framed Field | 45 mm | 64 mm | 130 mm | Ø 225 mm |
Camera Resolution | 5Mpx | 5Mpx | 5Mpx | 12 Mpx |
Max. Measurable Part Diameter | 42 mm | 60mm | 125 mm | 200 mm |
Min. Measurable Part Diameter | 0.5 mm | 0.5 mm | 1 mm | 2 mm |
Allowed Part Thickness (Z) | 0.5 ÷ 7 mm | 0.5 ÷ 15 mm | 0.5 - 30 mm | 0.5 - 50 mm |
Processing Time | 1 pz/sec. | 1 pz/sec. | 1 pz/sec. | 1 pz/sec. |
Resolution [mm/pixel] | 0.022 | 0.031 | 0.064 | 0.075 |
Measurement Repeatability | ± 0.004 mm | ± 0.005 mm | ± 0.01 mm | ± 0.013 mm |
Measurement Accuracy | ± 0.008 mm | ± 0.010 mm | ± 0.021 mm | ± 0.025 mm |
Noise Level | < 15 dB | < 15 dB | < 15 dB | < 15 dB |
Single-phase Power Supply Voltage | 230V - 50Hz | 230V - 50Hz | 230V - 50Hz | 230V - 50Hz |
Operating Temperature | +5°C to +40°C | +5°C to +40°C | +5°C to +40°C | +5°C to +40°C |
Relative Humidity | max 80% | max 80% | max 80% | max 80% |
Electrical Protection | IP 44 | IP 44 | IP 44 | IP 44 |
Installed Power | 0.5 kw | 0.5 kw | 0.5 kw | 0.5 kw |
Accuracy and repeatability are evaluated on the basis of a statistical test, in the range of ±3σ, where σ represents the standard deviation.
Size
