Optical 2D and thickness measuring instrument for O-rings and technical parts.
The instrument consists of a 2D measuring system (dimensional and surface control by a telecentric camera) and a thickness measuring system (by a laser). 2D measuring: the operator places the parts to be inspected under the camera which provides two images without distortion. The first image is processed with a dimensional tool, the second one is processed with a defect searching tool.
Thickness measuring: the operator places the parts onto a moving plate through the laser station. The acquired data is transferred and available to the operator thanks to a graphical interface.
|Type||Elastomers, rigid materials|
|Typical piece||O-ring, tech. parts|
|Characteristics||Clean, free of dust or particles that may alter the part’s profile|
|Size||2 mm ID – 200 mm OD|
|Cross section/Height||1 – 50 mm|
|Frame field||210 mm|
|Camera resolution||9 MP|
|Cycle time||1 pz/s (telecamera) 24 s (laser)|
|Repeatability||± 0.013 mm|
|Accuracy||± 0.027 mm|
|Single phase power supply||230 v – 50 Hz|
|Max installed power||0.5 Kw|
|Electrical protection||IP 44|
|Average consumption||0.02 Kw|
|Resolution||(A) 0.5 mm, (B) 1.5 mm|
|Working field||(A) 0.1 mm – 8 mm, (B) 0.1 mm – 16 mm|
|Measuring step||0.01 mm|
|Linearity||(A) 8 mm, (B) 16 mm|